​

Processing technology: impact-etching, milling, 3D-scanning, marking (replaceable working heads)

​

Processed materials: (engraving and milling modes) stone, glass, metal, plastic, wood, etc.

Number of coordinates (drives): 3 coordinates (X,Y,Z) with ball screw drive

 

Drive type: ball screw, dustproof, backlash-free, with tension adjustment

 

Working area (maximum image sizes per installation):

800 x 1400 mm,
800 x 1600 mm,

Overall dimensions of the machine:
1200 x 1940 x 620 mm (working field 800x1400 mm),
1200 x 2360 x 620 mm (working field 800x1600 mm),

Machine weight:
no more than 120 kg (working field 800x1400 mm),
no more than 130 kg (working field 800x1600 mm),
(including control unit)

 

Supply voltage: ~220 V / 50 Hz, ~127 V / 60 Hz

Impact engraving mode

Power consumption: no more than 120 W

Overall dimensions and thickness of the workpiece: not limited

Positioning accuracy: 0.025mm, no backlash

Image dot density: adjustable from 10 to 400 dots/cm, maximum 160,000 dots/cm2 (1016 dpi)

Workpiece surface level monitoring: yes, electronic level sensor

Gap setting method: automatic

Maximum permissible tilt (non-flatness) of the workpiece: up to 100mm per 1000mm (depending on the feed speed)

Number of semitones (gradations of impact force): 256 (limited by computer image format)

Engraving modes: point, amplitude, combined

Engraving depth: 0.1 .. 0.8 mm (on marble and soft materials up to 1.8 mm)

Performance: 300 x 400 mm image - from 20 minutes (set by operating mode)

Tool (needle) service life: minimum 10 images 300 x 400 mm (up to 100 images 300 x 400 mm with regrinding)

Milling mode

Workpiece surface level tracking: yes, with preliminary surface scanning

Vertical tool stroke: 120mm

Milling motor power: 2.2 kW

Cutter speed: adjustable 1000 .. 24000 rpm

Overall dimensions and thickness of the workpiece: not limited

Positioning accuracy: 0.025mm

Maximum milling depth: 60 mm (120 mm on request)

Productivity: depends on the operating mode, tool and material being processed, maximum feed speed of the cutter on stone is 20 mm/s

Tool life: depends on tool, material and depth of cut

Marking (vector engraving)

Marking mode (vector engraving): yes

3D scanner

Input of 3D models into a computer using a 3D scanner: yes

​

Personal computer requirements: any computer with Windows 10, 8, 7, Vista, XP SP3 operating system

​

Connection method to computer: USB