Home / Products / Laser-engraving machines / Graphic 3-KL technical specifications
Graphic 3-KL technical specifications
Universal automatic machine with functions of laser engraving + impact etching, laser and impact marking
(vector engraving) and laser cutting.
Working area: 75х135сm, 75х155сm.
Processing technology: laser engraving, impact-etching, laser and impact marking, laser cutting (replaceable working heads)
Processed materials: (laser and impact modes) stone, glass, metal, plastic, wood, etc.
Number of coordinates (drives): 3 coordinates (X,Y,Z) with ball screw drive
Drive type: ball screw, dustproof, backlash-free, with tension adjustment
Working area (maximum image sizes per installation):
750 x 1350 mm
750 x 1550 mm
Overall dimensions of the machine:
1250 x 1850 x 370 mm (working area 750x1350 mm)
1250 x 2050 x 620 mm (working area 750x1550 mm)
Machine weight:
no more than 60 kg (working area 750x1350 mm)
no more than 70 kg (working area 750x1550 mm)
(including control unit)
Supply voltage: ~220 V / 50 Hz, ~127 V / 60 Hz
Power consumption: no more than 500 W
Overall dimensions and thickness of the workpiece: not limited
Positioning accuracy: 0.050mm, no backlash
Image dot density: adjustable from 10 to 400 dots/cm, maximum 160,000 dots/cm2 (1016 dpi)
Maximum permissible tilt (non-flatness) of the workpiece: up to 100mm per 1000mm (depending on the feed speed)
Number of semitones (gradations of impact force): 256 (limited by computer image format)
Laser engraving mode
Emitter power: 40W (emitter up to 80W can be installed)
Laser emitter type: gas (CO2)
Emitter service life: up to 3000 hours
Engraving speed: up to 500mm/s (30,000mm/min)
Cooling type: water closed
Water temperature in the cooling system: 10..25 °C
Focal length: 50.8mm (2 inches)
Impact-etching mode
Workpiece surface level monitoring: yes, electronic level sensor
Gap setting method: automatic
Engraving modes: point, amplitude, combined
Engraving depth: 0.1 .. 0.8 mm (on soft materials up to 1.8 mm)
Performance: 300 x 400 mm image - from 20 minutes (set by operating mode)
Tool (needle) service life: minimum 10 images 300 x 400 mm (up to 100 images 300 x 400 mm with regrinding)
Marking (vector engraving)
Marking mode (vector engraving): yes
Requirements for a personal computer: any computer with the operating system Windows 10, 8, 7, Vista, XP SP3.
Connection method to computer: USB